The dimensionally compact signaling device, which, despite its favourable price, offers a great reliability and a 100% functionality.

The DX1 signaling device is powered by a 1x12V battery of the LR23A type, which has a sufficiently long endurance. In the event of a low battery, the alarm will alert you with a short beep. Use the "V" switch to select one of the 5 volume levels, including silent mode. It is also possible to select the desired tone and sensitivity level at 5 different levels. An indisputable motto of the signaling devices from the DX1 set is the possibility to choose from the 7 colours of the signaling LED diode. One can choose their favorite colour and, if required, , simply chooses another colour according as per instructions. The DX1 stores all selected settings in memory. A different tone will alert you to the snapshot, and the memory LED will light for 15 seconds after each shot. In the lower part there is an input for a 2.5 mm connector for connecting a light indicator. It is also possible to turn on the position diode during the night fishing. Water resistance is a matter of course, thanks to which you can rely on it in any conditions.

Note: The beacon has some electronics in common with the Coder set, but due to the absence of a transmitter, you do not pair this beacon with the set. However, there is a range test function in the electronic code. Therefore, never start the signaling device with the S button in position 5, as the function accompanied by flashing would start and this could be confusing.